A-A-51011A
The screen frame shall be mounted on four electrically conductive, smooth-rolling, quiet, swiveling casters which shall be a minimum of 3 inches in diameter.
The screen shall be free of cuts, tears, holes, perforations, and blisters. The surfaces of the screen shall be smooth, uniform, and free tack, lumps, embedded foreign matter, and pits.
Welds shall be thorough, non-porous, and free from pits, cracks, or other imperfections. All welds shall be cleaned. All exposed welds shall be ground and finished smooth to match adjoining surfaces.
The screen and frame shall be clean and free of oil, grease, dirt, or other contamination.
Workmanship. The x-ray protective screen shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One x-ray protective screen, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business