A-A-53439
The base shall have a recessed holding tray for discarded film packets, and four recessed retainers to prevent spillage of four approximately 8 ounce (236 cc) plastic processing jars.
The processing chamber shall be supplied with four processing jars, a develop jar, a fixer jar, and two rinse water jars. The developer and fixer jars shall each be equipped with easy-to-operate hinged stainless steel closure lids which are of the “pop-top” type, are air tight, and will prevent oxidation of the solutions so as to prolong solution life. The two water jars shall have a screw caps to prevent spillage if and when the processing chamber is transported to an alternate workplace.
The processing chamber shall be furnished with four hook and pile fasteners to secure bottom of base to counter top or table to prevent slippage of unit. The fasteners shall allow for easy removal for chamber cleaning or use at another location.
The processing chamber shall be supplied with three film clips for film drying.
All parts of the processing chamber shall be resistant to x-ray developer and fixer chemicals. The chamber finish shall be free of pits, burrs, sharp edges, scratches, stains, or other appearance defects.
Each processing chamber shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One chamber, as specified, constitutes one unit.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business