A-A-53318
Compartmented storage box
The storage box shall be fabricated of wood, metal, or plastic and shall have a hinged cover. There shall be 36 compartments for letters and numerals and a space for two double-channel holders. When closed the nominal overall dimensions of the box shall be as follows.
Length – 9-1/2 inches
Width – 12-1/2 inches
Height – 2 inches
The compartments shall be approximately 1-3/8 inch by 1-3/8 inch. The holder area shall have a width of 2-1/4 inches minimum and shall be large enough to accommodate the holder. Construction of the compartments shall be sturdy, and shall be securely fastened, to prevent accidental removal of partitions.
The box shall have a hinged lid lined with sponge rubber or polyurethane foam, cemented in place, and so built that when the lid is closed, it will not be possible for lead letters or numerals to move to adjacent compartments when the box is turned upside down or shaken in any position.
The lid shall open approximately 105° and shall be so designed that it will remain open when placed in that position. The hinges shall be sturdy and firmly mounted on either the short or the long side of the box. A spring-action catch shall be provided to close the lid.
The storage box shall be free from burrs, slivers, sharp, edges, or deformities.
The box shall be clean, and free of grease, oil, dirt, or other foreign material.
Workmanship. The x-ray film identification marker set shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Set (SE). One marker set, as specified, constitutes one unit.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business