A-A-53082A
Defects.
Any component part missing, broken, or otherwise unusable.
Hanger not fabricated from one piece corrosion-resisting steel, AISI 300 series.
Upper clips do not fall at least 3 inches below the top bar with a film mounted into position.
Hanger not passivated or electropolished.
Exposed edges of hanger not free of burrs or sharpness.
Riveted or clinched joints not securely and properly fastened.
Finish not free of pits, cracks, scratches, or corroded areas.
Hanger not free of grease, oil, dirt, or other foreign matter.
Sampling for tests. Sampling for tests (dimensional) shall be conducted in accordance with Mil-Std-105, with an AQL of 2.5 (percent defective) and inspection level of S-1. The unit of product for test purposes shall be one x-ray film hanger.
Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers’ own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Regulatory requirements.
Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business