A-A-51304A
A-A-51304A
The chest shall be equipped with 3 lift handles, one on each side, and one on the hinged cover.
All inside and inside and outside exposed surfaces of the chest shall be degreased and finished with baked enamel paint or an epoxy powder coating. If enamel is used, a primer coat shall be applied to all external and internal exposed surfaces as well as unexposed surfaces inside the walls of the chest. The final chest finish shall be the manufacturer’s standard color and shall be hard, smooth, and highly resistant to abrasion, cracking, and chipping.
Workmanship. The x-ray film protective chest shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One chest of the type specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business