A-A-51292
12 December, 1985
COMMERCIAL ITEM DESCRIPTION
RULE, ANATOMICAL
The General Services Administration has authorized the use of this commercial item description.
This commercial item description covers a transparent anatomical rule suitable for general linear measurements in radiography.
Salient characteristics:
Shall be a rigid, transparent plastic anatomical rule suitable for use in radiography.
The rule shall be 18 inches (460 mm) long, approximately 2 inches wide and 0.045 inch thick, with both English and metric graduations on the same face, but on opposite edges. The graduation markings shall be perpendicular to the long axis and parallel with each other.
The English graduations shall be at 1/16 inch intervals while the metric intervals shall be spaced 1 millimeter apart. The rule shall be suitably marked with Arabic numerals. Graduation lines and numerals shall be suitably constructed to protect obliteration.
All rule surfaces shall be smooth with no sharp edges.
Workmanship. The anatomical rule shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). Each rule, as specified, constitutes one unit.
Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers’ own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Regulatory requirements.
Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business