A-A-51249B
Flatness test.
The test for flatness shall be conducted on the open and closed cassette. The cassette frame shall rest on a flat test surface and any height variation shall be measured by passing feeler gages between the flat surface and the frame. The deviation from flatness of the front panel shall be determined by measuring the maximum distance between the front and face and a straight edge placed at various angles on the front panel. The damaged corners resulting from the drop test shall not be placed on the flat test surface, and shall not be measured. Both frame and front panel shall be flat within 1/16 inch. Any deviation will constitute a defect.
X-ray opacity of the front panel test.
A non-screen radiographic film shall be exposed in a cardboard, or plastic film holder, through the front panel with an exposure time to produce a diffuse transmission density of 1.0 ±
0.2. The developed film shall be examined for uniformity of opacity and for evidence of included foreign matter. Visible shadows or non-uniformity shall be cause for rejection.
Lightproof test.
A high speed radiographic film of the applicable size, shall be placed in the cassette, and all sides and edges of the cassette shall be exposed to a 100 watt incandescent lamp, operated at its rated voltage, at a distance of 3.3 feet (1 meter) from the cassette for a period of ten minutes. The developed test film shall be compared with a developed, unexposed film of the same lot. A density on the test film greater than that on unexposed film shall be cause for rejection. When viewed against the illuminator, the test film shall show no density variations, except that fog within 1/8 inch of film border or within 1/4 inch square at the film corners shall not be considered a defect.
Cassette liners test.
A radiographic film in the sample cassette shall be exposed with an exposure time to produce a diffuse transmission density of 1.0 ± 0.2. Shadows and artifacts on the test film shall be cause for rejection of the cassette.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business