[INCH-POUND]
A-A-53094A
4 June 1993
SUPERSEDING
A-A-53094
31 August 1987
COMMERCIAL ITEM DESCRIPTION
RACKS, X-RAY FILM HANGER
The General Services Administration has authorized the use of this Commercial Item Description as a replacement for GG-R-0025B (DSA-DM) and GG-R-25 which are cancelled.
This Commercial Item Description covers two types of racks suitable for holding x-ray film hangers.
Salient characteristics:
The x-ray film hanger racks shall be fabricated from corrosion-resisting steel, American Iron and Steel Institute (AISI) 300 series, shall accommodate any brand or size radiological films, and shall be one of the following designs:
Type 1 – wall mounted, used for holding 18 empty x-ray film developing hangers. The rack shall be approximately 2-1/2 inches high by 10 inches long, and shall have hanging arms which shall be a minimum of 8 inches in length. The rack shall have suitable mounting holes for attachment to a wall, and may be supplied in a one-piece or two-piece design.
Type 2 – used for holding radiographic film hangers while drying x-ray film. The rack shall be in accordance with figure 1.
Any welding shall be durable, sound in every detail, free of cracks, porosity, and other defects, and in accordance with the latest practices recommended by the American Welding Society. The rack shall be free from burrs or sharp edges.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business