A-A-53082A
17 June 1988
SUPERSEDING
A-A-0053082 (DM)
20 July 1987
COMMERCIAL ITEM DESCRIPTION
HANGER, X-RAY FILM
The General Services Administration has authorized the use of this Commercial Item Description.
This Commercial Item Description covers a hanger used for processing medical x-ray films. The hanger shall be supplied in one of the following nominal frame sizes:
Size 1 – 9-1/2 inches by 9-1/2 inches
Size 2 – 24 cm by 30 cm
All parts of the hanger, including clips, clip points, top bar pins, springs, frames, and any other parts, shall be constructed in one piece corrosion-resisting steel, conforming to American Iron and Steel Institute (AISI) series 300.
Each hanger shall consist of a top bar, a rectangular frame, spring clips, and, if required, a crossbar designed and constructed to hold film in a taut, vertical position for processing.
The top bar shall be 16 ± 1/16 inch long of 1/4 inch channel or solid bar stock. If channel, it shall be formed of stainless steel 0.031 inch thick with commercial tolerances. Each leg of the channel shall form an angle of 90° + 5° -0° with the base. If solid bar stock, the top bar shall be 0.250 ± 0.015 inch square. The sides of the top bar shall be parallel with the plane of the wire frame, with a maximum offset of 0.005 inch.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business