A-A-51341
31 January 1986
COMMERCIAL ITEM DESCRIPTION
LABEL, X-RAY FILM IDENTIFICATION
The General Services Administration has authorized the use of this commercial item description.
This commercial item description covers a pressure sensitive adhesive, radiopaque label suitable for permanent identification of x-ray films in military medical treatment facilities.
Salient characteristics:
Shall be a radiopaque label tape on which information can be written, printed, or typed for permanent identification of x-ray films.
Shall be provided with pressure sensitive adhesive on a strippable, protective backing for quick attachment to the holder or cassette.
Shall have the following dimensions: 4 ± 1/8 inches in length, 2 ± 1/32 inches in width, with a radiopaque strip within the borders 13/16 ± 1/16 inch wide.
Manufacturer’s instructions shall be furnished with each unit of issue.
Workmanship. The x-ray film identification label shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). One package containing three hundred labels, as specified, constitutes one unit.
Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers’ own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Regulatory requirements.
Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business